System Software

  • cPRO_SW_PK_v3.0.0

    Download
    2019-10-07

    More Informations

    Please use an empty USB stick, unzip the software package and copy it onto the USB drive.

    Cable CAM (7p) – LBUS is required for updating software on cPRO motor and cPRO camin. (Can be used for power supply or update).

    The cPRO_SW_PK_v3.0.0 applies to the

    • cPRO hand unit

    • cPRO ONE hand unit

    • cPRO motor

    • cPRO camin

     

     

    cPRO / cPRO ONE hand unit:

    Changes between 2.2.0 and 3.0.0

     

    • new features:   

      • camera control support for ARRI, RED and SONY, including list handling for FPS, shutter, ISO, ND filter, white balance, camera user buttons, playback wizard

      • license handling for camera control added

      • BB1 executes „select" in the cPRO menu

      • new user button features added: Load Lens, Load pre-marked ring, Load pre-marked strip, Camera buttons 1-6
      • send lens feature added

    • bugfixes:

      • pre-marked rings: move between INF and last engraved value optimized

      • touch button (TB1-6) handling optimized

      • MB3 long press functionality corrected

      • shutter speed visualization corrected

      • pre-marked strips 1.0 to close corrected

      •  

      

    cPRO motor / cPRO camin:

    Changes between 2.0.3 and 3.0.0

     

    • new features:

      • camera control support added

      • [C0XE-K08] Cable CAM (7p) - Sony Remote (8p) / D-Tap supported

      • [C0XE-K07] Cable CAM (7p) - LCS (5p) supported

      • master / client selectable for cPRO camin 
                 

    • bugfixes:

      • serial motor control via cable XMO optimized

    • known issues:

      • shutter speed cannot be changed on SONY VENICE remotely when in RCP mode

  • cPRO_SW_PK_v2.2.0

    Download
    2019-07-24

    More Informations

    Please use an empty USB stick and re-format to FAT32 before proceeding.

    Cable CAM (7p) – LBUS is required for updating software on cPRO motor and cPRO camin. (Can be used for power supply or update).

     

    cPRO_SW_PK_v2.2.0 is compatible with:

    • cPRO hand unit

    • cPRO ONE hand unit

     


    cPRO hand unit:

    Changes between 2.0.3 and 2.2.0

    ------------------------------------------------

    new features:

    • cPRO ONE hand unit support

    • USB lens data export/import

    • Chinese language user interface

    • 6 digital touch buttons

    • ExFAT support


    known issues (to be addressed):

    • menu button 3 does not accept long press functionality

    • shutter speed is sometimes not visualized correctly

    • cPRO pre-marked iris strip: close - T1.0 [K2.0019837] -> motor movement between T22 and close is not fluid

  • cPRO hand unit User Guide

    Download
    2019-07-23

    More Informations

    cPRO hand unit User Guide V3.0

  • cPRO_SW_PK_v2.0.3

    Download
    2019-04-04

    More Informations

    Please use an empty USB stick and re-format to FAT32 before proceeding.

    Cable CAM (7p) – LBUS is required for updating software on cPRO motor and cPRO camin. (Can be used for power supply or update).

     

    The SW release cPRO_SW_PK_v2.0.3 applies to:

     

    • cPRO hand unit

    • cPRO motor

    • cPRO camin

    • Cinefade VariND

     

    Please update the cPRO hand unit first before updating any other LBUS device.

     

     

    Please note:

    After updating your hand unit software, the cPRO’s thumbwheel will NOT be recognized. This is NORMAL. The menu will display: CONTROLS/Thumbwheel/Control/ “?“

    The new software allows the thumbwheel to be assigned as a motor controller. I.e. RotaPolar or a VariND when using the new Cinefade VariND filter.

    Please go to CONTROLS/Thumbwheel/Control and assign the thumbwheel to “off“. This will allow the thumbwheel to be used for regular menu navigation again.

     

    The cPRO_SW_PK_v2.0.3 includes the following new features:

     

    • network functionality (multi hand unit control): up to 2 cPRO hand units can communicate with one cPRO motor or cPRO camin.

    Other controllers including pan-bar/ steady zoom and ARRI Master Grips can be cabled to either one of the hand units, or to the end of the LBUS daisy chain on the camera.

     

    • control limit: Limit the travel of the knob or slider while maintaining full rotation of the lens.

     

    • motor limit: Limit the rotation of the lens motor while maintaining the full range on the knob or slider.

     

    • Cinefade mode (with Cinefade VariND only): Cinefade is a unique cinematic tool which lets you vary depth of field in a single shot while maintaining a constant exposure. It can also be used as a RotaPolar or VariND.

     

    • 4th axis control*. The thumbwheel can be assigned to focus, iris or zoom in a regular 3 axis set up. Or, assigned as a 4th axis to control the RotaPolar or VariND when using the Cinefade VariND. (*Not a 4th cforce motor yet)

     

    cPRO hand unit:

     

    Changes between 1.0.11 and 2.0.3

    -------------------------------

    new features: 

    • 4th axis thumbwheel control added  

    • Axis Filter for Cinefade added

    • Cinefade function supported (User buttons, Main screen, Menu items)

    • Radio Red Plus for network functionality (multi hand unit control). Not cross-compatible with previous software. Requires an update on cPRO hand unit AND cPRO motor/camin

    • Control and motor limit enabled for slider/knob

     

    bugfixes:

    • Minor Lens Wizard issues 

    • User buttons assigned to "off" were reset to default setting after a power cycle

    • REC button triggering other features

     

    known issues:

    • Pre-marked iris strip “T1 - close" not fully optimized

    • lens wizard resets when a USB Stick with a lot of files is mounted

     

     

    cPRO motor / cPRO camin:

     

    Changes between 1.3.1 and 2.0.3

    -------------------------------

    new features:

    • Radio Red Plus for network functionality (multi hand unit control). Not cross-compatible with previous software. Requires an update on cPRO hand unit AND cPRO motor/camin

     

    bugfix:

    • changing settings on Red cameras caused a system reset 

     

    known issues:

    • motor direction changes to „left“ on ARRI cameras, if the camera or cPRO motor/camin is power cycled

  • cPRO_SW_PK_v1.2

    Download
    2019-01-08

    More Informations

    cPRO software package v 1.2.cmf contains:

    cPRO hand unit firmware 1.0.11

    cPRO motor / camin firmware 1.3.1


    cPRO hand unit changes between 1.0.10 and 1.0.11

    bugfixes:

    • crash in lens load at startup

    • lens wizard: focus scale with single value not allowed

    • wrong infinity calculation and handling for imperial lenses


    cPRO motor / camin changes between 1.1.4 and 1.3.1

    new features:

    • Display Flip added

    • Radio Error visualised if initialisation of radio module didn't work


    To update the cPRO system, please download and unpack the .zip file. For further instructions, please refer to the cPRO user guide.

  • cPRO motor User Guide

    Download
    2018-11-15

    More Informations

    cPRO motor User Guide V 1.1

  • cPRO camin User Guide

    Download
    2018-11-15

    More Informations

    cPRO camin User Guide V 1.1

  • 20180801_cPRO_hand_unit_datasheet

    Download
    2018-09-03

  • 20180801_cPRO_motor_datasheet

    Download
    2018-09-03

  • 20180801_cPRO_camin_datasheet

    Download
    2018-09-03